Cf Interconnects
List interconnects
List interconnect Details
Update interconnect
Update multiple interconnects
ModelsExpand Collapse
CfInterconnectListResponse { interconnects }
interconnects?: Array<Interconnect>
True if automatic stateful return routing should be enabled for a tunnel, false otherwise. Requires the coupler_integration account flag to be enabled; requests setting this to true without that flag will be rejected.
bgp?: BGP { as_no, cloudflare_endpoint, customer_asn, 5 more }
Prefixes in this list will be advertised to the customer device, in addition to the routes in the Magic routing table.
MD5 key to use for session authentication.
Note that this is not a security measure. MD5 is not a valid security mechanism, and the key is not treated as a secret value. This is only supported for preventing misconfiguration, not for defending against malicious attacks.
The MD5 key, if set, must be of non-zero length and consist only of the following types of character:
- ASCII alphanumerics:
[a-zA-Z0-9] - Special characters in the set
'!@#$%^&*()+[]{}<>/.,;:_-~= |`
In other words, MD5 keys may contain any printable ASCII character aside from newline (0x0A),
quotation mark ("), vertical tab (0x0B), carriage return (0x0D), tab (0x09), form feed
(0x0C), and the question mark (?). Requests specifying an MD5 key with one or more of
these disallowed characters will be rejected.
The IPv4 interface address for the interconnect. For MPLS Interconnects, use a /30 or /31 prefix. For GRE Interconnects, a /29, /30, or /31 prefix may be used. A /29 prefix is only allowed for v1.5 interconnects, and the address must be the .3 host of the subnet (the fourth address overall; the network address is not usable). Select the subnet from RFC 1918 or the approved link-local ranges.
A 127 bit IPV6 prefix from within the virtual_subnet6 prefix space with the address being the first IP of the subnet and not same as the address of virtual_subnet6. Eg if virtual_subnet6 is 2606:54c1:7:0:a9fe:12d2::/127 , interface_address6 could be 2606:54c1:7:0:a9fe:12d2:1:200/127
CfInterconnectGetResponse { interconnect }
interconnect?: Interconnect { id, automatic_return_routing, bgp, 12 more }
True if automatic stateful return routing should be enabled for a tunnel, false otherwise. Requires the coupler_integration account flag to be enabled; requests setting this to true without that flag will be rejected.
bgp?: BGP { as_no, cloudflare_endpoint, customer_asn, 5 more }
Prefixes in this list will be advertised to the customer device, in addition to the routes in the Magic routing table.
MD5 key to use for session authentication.
Note that this is not a security measure. MD5 is not a valid security mechanism, and the key is not treated as a secret value. This is only supported for preventing misconfiguration, not for defending against malicious attacks.
The MD5 key, if set, must be of non-zero length and consist only of the following types of character:
- ASCII alphanumerics:
[a-zA-Z0-9] - Special characters in the set
'!@#$%^&*()+[]{}<>/.,;:_-~= |`
In other words, MD5 keys may contain any printable ASCII character aside from newline (0x0A),
quotation mark ("), vertical tab (0x0B), carriage return (0x0D), tab (0x09), form feed
(0x0C), and the question mark (?). Requests specifying an MD5 key with one or more of
these disallowed characters will be rejected.
The IPv4 interface address for the interconnect. For MPLS Interconnects, use a /30 or /31 prefix. For GRE Interconnects, a /29, /30, or /31 prefix may be used. A /29 prefix is only allowed for v1.5 interconnects, and the address must be the .3 host of the subnet (the fourth address overall; the network address is not usable). Select the subnet from RFC 1918 or the approved link-local ranges.
A 127 bit IPV6 prefix from within the virtual_subnet6 prefix space with the address being the first IP of the subnet and not same as the address of virtual_subnet6. Eg if virtual_subnet6 is 2606:54c1:7:0:a9fe:12d2::/127 , interface_address6 could be 2606:54c1:7:0:a9fe:12d2:1:200/127
CfInterconnectUpdateResponse { modified, modified_interconnect }
modified_interconnect?: ModifiedInterconnect { id, automatic_return_routing, bgp, 12 more }
True if automatic stateful return routing should be enabled for a tunnel, false otherwise. Requires the coupler_integration account flag to be enabled; requests setting this to true without that flag will be rejected.
bgp?: BGP { as_no, cloudflare_endpoint, customer_asn, 5 more }
Prefixes in this list will be advertised to the customer device, in addition to the routes in the Magic routing table.
MD5 key to use for session authentication.
Note that this is not a security measure. MD5 is not a valid security mechanism, and the key is not treated as a secret value. This is only supported for preventing misconfiguration, not for defending against malicious attacks.
The MD5 key, if set, must be of non-zero length and consist only of the following types of character:
- ASCII alphanumerics:
[a-zA-Z0-9] - Special characters in the set
'!@#$%^&*()+[]{}<>/.,;:_-~= |`
In other words, MD5 keys may contain any printable ASCII character aside from newline (0x0A),
quotation mark ("), vertical tab (0x0B), carriage return (0x0D), tab (0x09), form feed
(0x0C), and the question mark (?). Requests specifying an MD5 key with one or more of
these disallowed characters will be rejected.
The IPv4 interface address for the interconnect. For MPLS Interconnects, use a /30 or /31 prefix. For GRE Interconnects, a /29, /30, or /31 prefix may be used. A /29 prefix is only allowed for v1.5 interconnects, and the address must be the .3 host of the subnet (the fourth address overall; the network address is not usable). Select the subnet from RFC 1918 or the approved link-local ranges.
A 127 bit IPV6 prefix from within the virtual_subnet6 prefix space with the address being the first IP of the subnet and not same as the address of virtual_subnet6. Eg if virtual_subnet6 is 2606:54c1:7:0:a9fe:12d2::/127 , interface_address6 could be 2606:54c1:7:0:a9fe:12d2:1:200/127
CfInterconnectBulkUpdateResponse { modified, modified_interconnects }
modified_interconnects?: Array<ModifiedInterconnect>
True if automatic stateful return routing should be enabled for a tunnel, false otherwise. Requires the coupler_integration account flag to be enabled; requests setting this to true without that flag will be rejected.
bgp?: BGP { as_no, cloudflare_endpoint, customer_asn, 5 more }
Prefixes in this list will be advertised to the customer device, in addition to the routes in the Magic routing table.
MD5 key to use for session authentication.
Note that this is not a security measure. MD5 is not a valid security mechanism, and the key is not treated as a secret value. This is only supported for preventing misconfiguration, not for defending against malicious attacks.
The MD5 key, if set, must be of non-zero length and consist only of the following types of character:
- ASCII alphanumerics:
[a-zA-Z0-9] - Special characters in the set
'!@#$%^&*()+[]{}<>/.,;:_-~= |`
In other words, MD5 keys may contain any printable ASCII character aside from newline (0x0A),
quotation mark ("), vertical tab (0x0B), carriage return (0x0D), tab (0x09), form feed
(0x0C), and the question mark (?). Requests specifying an MD5 key with one or more of
these disallowed characters will be rejected.
The IPv4 interface address for the interconnect. For MPLS Interconnects, use a /30 or /31 prefix. For GRE Interconnects, a /29, /30, or /31 prefix may be used. A /29 prefix is only allowed for v1.5 interconnects, and the address must be the .3 host of the subnet (the fourth address overall; the network address is not usable). Select the subnet from RFC 1918 or the approved link-local ranges.
A 127 bit IPV6 prefix from within the virtual_subnet6 prefix space with the address being the first IP of the subnet and not same as the address of virtual_subnet6. Eg if virtual_subnet6 is 2606:54c1:7:0:a9fe:12d2::/127 , interface_address6 could be 2606:54c1:7:0:a9fe:12d2:1:200/127